Sony STR-D360Z Operating Instructions Manual page 22

For buttons not described on previous pages and buttons with names different from the buttons on the main unit.
Remote Operates Function
Button
0-9 Receiver
CD player/MD
recorder/DVD
player
TV/VCR/DBS
Selects presetnumbers.
Selects tracknumbers.
0 selects t rackI0.
Selects channel numbers.
>10
CD player/ Selects track numbers
Tape deck/ over 10.
MD recorder
CH/PRESET Receiver Scans and selects preset
+/- stations.
TV/VCR/DBS Selects preset channels.
D. SKIP CD player Skips discs (CD player
with multi-disc changer
only).
DISC CD player Select discs (Mega storage
CD player only).
• _'q/_,," CD player/ Searches tracks (forward
DVD player or backward).
Tape deck/MD Fastforwards or rewinds.
recorder/VCR
/_ CD player/ Skips tracks.
MD recorder
II
CD player/
Tape deck/MD
recorder/VCR/
DVD player
Pauses play or record.
(Also starts recording
with components in
record standby.)
P" CD player/ Starts play.
Tape deck/MD
recorder/VCR/
DVD player
• CD player/ Stops play.
Tape deck/MD
recorder/VCR/
DVD player
-'q Tape deck Starts play on the reverse
side.
• - _ ..,._Tape deck Sets tape decks to the
record standby mode.
• + _ Tape deck/ Starts recording when
MD recorder/ pressed with P.- (or "91
VCR on tape deck).
Remote Operates Function
Button
RMS Tape deck Selects tape direction (for
DIRECTION tape decks with the RMS*
function.)
RMS CLEAR Tape deck Clears RMS* program (for
tape decks with the RMS
function.)
RMS/START Tape deck Programs tracks (tape
deck with the RMS*
function only).
ENTER TV/VCR/DBS Changes channels when
used with 0-9.
TV/VIDEO TV/VCR Selects input signal: TV
input or video input.
VISUAL TV/VCR/ Turns on or off the power.
POWER LD Player/DBS/
DVD player
TV CONTROL TV Turns on the TV, switches
the input to "TV," and
sets the remote to operate
the TV.
-/- - TV Selects the channel entry
mode, either one or two
digit (in Europe only).
SUB CH +/- TV Selects preset channels for
the small picture.**
POSITION TV Changes the position of
the small picture.**
SWAP TV Swaps the small and the
large picture.**
P IN P TV Activates the picture-in-
picture function.**
JUMP TV Jumps back and forth
between the previous and
current channels.
ANT TV/VTR VCR Selects output signal from
the antenna terminal: TV
signal or VCR program.
* RMS: Random Music Sensor
** Only for Sony TVs with the picture-in-picture'unCtion
22