Bios Configuration Jumper Block; Location Of The Jumper Block - Intel DQ67OW Specification

Intel Desktop Board DQ67OW Technical Product Specification
2.3

BIOS Configuration Jumper Block

CAUTION
Do not move the jumper with the power on. Always turn off the power and unplug the
power cord from the computer before changing a jumper setting. Otherwise, the
board could be damaged.
Figure 13 shows the location of the jumper block. The 3-pin jumper block determines
the BIOS Setup program's mode. Table 27 describes the jumper settings for the three
modes: normal, configure, and recovery.
56
Figure 13. Location of the Jumper Block