Table of Contents
Advertisement
Teaching the Remote Control New Functions
The remote control can learn up to 25 additional functions from the
component's original remote control.
Example:
Your DVD player remote control has a scan function that you may use
frequently. There is not a scan button on the remote control. You can assign
a button and use the DVD remote to teach the remote control the scan
function.
Important Make sure that you have already programmed the remote
control for the component. See " Programming the Universal
Remote Control" on page 12.
Make sure that area lighting is not too bright or it will interfere
with the learning process.
To teach the remote control a new function:
1 Press and hold the SETUP button on the remote control until the LED
flashes twice.
2 Press 975. The LED flashes twice.
3 Press the component button that you want (DVD) once.
4 Press the button that you are assigning the new function to. The LED
flashes quickly while it is waiting to receive the signal from the teaching
remote.
5 Hold the teaching remote control approximately 1-inch (2.54cm) from the
remote control making sure that the infrared ports are lined up, then
press the button on the teaching remote that you want the remote to
learn. The LED flashes twice.
6 Press the SETUP button to exit learning mode.
Advertisement
Table of Contents
