Attaching The Paper Basket - Epson Pro 7600 Unpacking And Setup Manual

Epson injet printer stylus pro 7600 / 9600 unpacking and setup guide
Hide thumbs Also See for Pro 7600:
Table of Contents

Advertisement

7. Remove the protective materials.
a
b
a:
from the front cover (tapes)
b:
from the ink compartment cover (tapes)
c:
from the side of the print head compartment
(fixing metal plate inside the front cover)
c
Caution:
Watch your fingers when opening and
closing the front cover.
8. Close the front cover.

Attaching the paper basket

1. Fully insert and attach the short basket hooks
(E) to the upper guides of base upright left and
right.
E
2. Likewise, fully insert and attach the long
basket hooks (D) to the lower guides.
c
3. Turning the stitch side downward, spread the
paper basket on the floor.
4. Holding the rear shaft, pass it under the
horizontal struts. Then insert the stanchion
pins into the holes on the base upright left and
right.
5. Slide out the upper basket hooks to their full
length.
D
7

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Stylus pro 7600Stylus pro 9600

Table of Contents