Epson PictureMate Pal PM 200 Start Here Manual page 6

Select All Photos
1
Press Select All.
2
To print more than one copy of all the photos, press
to increase the number of copies. (Press to decrease
the number.)
3
Continue with "Print Selected Photos" below.
Print Selected Photos
1
Press Layout to select the layout
of your photos on the paper.
Note:
options by pressing the Menu button,
including selecting a Proof Sheet
layout containing small images
(thumbnails) of all your photos.
2
Press Print.
3
Press or to review your selected photos and copies
on the preview screen.
4
Press Print to print your photos.
More on PictureMate Pal
Check your printed manual
See the Basics book for instructions on
printing from PictureMate Pal, your computer,
and other devices. Also learn how to save
photos on your computer, replace your Print
Pack (photo paper and photo cartridge), take
care of PictureMate Pal, and solve problems.
Check your on-screen manual
When you install your PictureMate Pal software
from the CD, you'll see an icon for your on-screen
PictureMate Pal User's Guide on your computer
screen. Double-click that icon for comprehensive
instructions on using PictureMate Pal and its software.
Note:
For information on possible software updates for PictureMate
Pal, go to http://support.epson.com, select Printers, and select your
product under Personal Photo Lab. Then check for updated software
in the Drivers & Downloads section.
Caution:
keep it out of the sun and don't leave it in your car
or other location where it can get too hot or too cold.
Epson and PictureMate are registered trademarks and Exceed Your Vision is a
trademark of Seiko Epson Corporation.
General Notice: Other product names used herein are for identification purposes
only and may be trademarks of their respective owners. Epson disclaims any and
all rights in those marks.
© 2006 Epson America, Inc. 5/06
You can access other print
To avoid damaging your PictureMate Pal,
Printed in XXXXXX XX.XX-XX XXX
CPD-21347