The Video Decoder tab has the following controls.
Video Standard
Signal Detected
Lines detected
VCR Input
Output Enable
OK
Cancel
Apply
Help
ViewCast
Select the video standard
When the card does not detect the input signal, this field displays a 0.
When the card detects the input signal, it displays 1.
This field displays the number of lines the card detects in the input
signal.
This field is a DirectShow feature that is not implemented.
This field is a DirectShow feature that is not implemented.
Click OK to accept the settings.
Click Cancel to reject the settings and close the window.
Click Apply to apply the settings.
Click Help to access the user guide.
Osprey 240e/450e User Guide
25