Table of Contents
Advertisement
The Input tab has the following controls.
Video Input
Video Present
Video Standard
Input Format
VideoCheck
VideoGraph
VbiGraph
OK
Cancel
Apply
Help
ViewCast
The Video Input section of the tab allows you to select the video
signal source.
This indicator is enabled when video is present.
The Video Standard allows you to select the standard different
countries or geographical areas use (Figure 10) from the drop-
down list.
This control works with digital cameras routing through the
Osprey's card's analog input.
This button opens a simple video monitoring window.
This button launches a vectorscope/lumascope utility.
This button opens an applet that displays the raw waveforms of
the video's Vertical Blanking Interval (VBI).
Click OK to accept the settings.
Click Cancel to reject the settings and close the window.
Click Apply to apply the settings.
Click Help to access the user guide.
Osprey 240e/450e User Guide
15
Hide quick links:
Advertisement
Table of Contents
