Vermont Castings LHEACNSS Contour KT1B80 Installation Instructions

LHEACNSS Contour
Trim Kit
Installation Instructions
Kit: KT1B80
for Models LHEC30,
LHEC20, LHER20
Caution
Always place castings on a flat protected work sur-
face, such as a towel, blanket or carpet.
These instructions cover the assembly of the KT1B80
Trim Kit and installation to the LHEC30, LHEC20 and
LHER20 fireplace inserts.
Carefully unpack and inspect all components from the
shipping box. Report any missing or damaged parts to
your dealer immediately. Install trim kit after all other
fireplace installation work has been completed, thor-
oughly checked and tested for proper operation, leaks
and installation requirements.
Tools required: Tape measure
Trim kit parts
Column Right Assembly
(1) Column, right
(1) Boot, right
(1) Slider Clip, right
(1) Bracket, On/Off Switch
(2) 1/4-20 Round Head Screw
(2) 1/4-20 Wing Screw
(3) 1/4 Flat Washer
Column Left Assembly
(1) Column, left
(1) Boot, left
(1) Slider Clip, left
(1) 1/4-20 Round Head Screw
(2) 1/4-20 Wing Screw
(3) 1/4 Flat Washer
Key
Upper Mounting Bracket
Upper Mounting Bracket R
Hardware Bag:
(5) 1/4-20 Wing Screw
(5) 1/4 Flat Washer
Instruction Sheet
Assembly
Determine which model fireplace insert you have. This
will be important when adjusting the height and width of
the surround.
1. Place the key (30001981) on your work surface with
2. Place the column right assembly (30002073) onto
3. Place the column left assembly (30002074) onto the
Fig. 1 Place column right assembly onto key.
Part #
30002073
30001978
30001982
30002050
10005035
1200894
1201621
1202474
30002074
30001979
30001983
30002049
1200894
Fig. 2 Place column left assembly onto key.
1201621
1202474
4. Install the upper mounting bracket. Use the upper
30001981
30002053
30002054
30001988
1201621
1202474
30001987
the threaded holes facing up.
the key. (Fig. 1)
key. (Fig. 2)
KT424
column right
assy
9/03
KT425
mounting bracket marked R (30002054) for the
column left
LHER20. Use the unmarked upper mounting bracket
assy
(30002053) for LHEC30 and LHEC20. (Fig. 3)
9/03
Key
Column Right Assembly
KT424
Key
Column Left
Assembly
KT425
30001987 8/08 Rev. 4