Verilux Rise & Shine Deluxe VA02 Instruction Manual page 9

IMPORTANT – Installation of batteries, while not required, is
Inserting batteries for backup
In the event that the Rise & Shine
Lamp loses power, the clock time and alarm settings are stored in
backup memory for up to 48 hours.
1. Open the battery door located on the bottom of the lamp
(do not remove screw located adjacent to battery door).
2. Insert four AA batteries (not included) according to the polarity
indicated inside the battery compartment, and replace the
battery door.
Note: With the backup battery power, the batteries provide temporary power
only for memory of the alarm settings – the light will not function.
Shade & bulb installation
1. Remove the clear cellophane protective wrap
from the lamp shade.
CAUTION – Failure to remove cellophane
protective wrap from the lamp shade may
pose a RISK OF FIRE OR PERSONAL
INJURY.
2. Attach the shade to the lamp by aligning
the ring of the shade harp with the ring
on the lamp socket – push firmly down.
3. Carefully Screw the bulb into socket.
– DO NOT FORCE.
Set-Up Instructions
recommended prior to installation of the shade and bulb.
Installation of batteries is required for backup operation.
® Natural Alarm Clock
8
® Bedside