Important Safety Instructions; Warnings And Precautions - Verilux Planet Light PL04 User Manual

Energy saving natural spectrum floor lamp
Hide thumbs Also See for Planet Light PL04:
Table of Contents

Advertisement

Thank you for purchasing the Planet Light
Spectrum
Floor Lamp. Please read the following safety information
®
before using. To reduce the risk of fire, electrical shock or injury to
persons:
• Do NOT dismantle.
• Do NOT alter power cord.
• Turn off/unplug and allow to cool before replacing bulb or cleaning.
• For indoor use only.
• The lamp is an electrical device. DO NOT USE NEAR WATER.
• Before plugging in the lamp, check to make sure the voltage of the
wall socket does not exceed 120 volts.
• Not for use with light dimmers, timers, motion detectors or extension
cords.
• This product may cause interference with radios, cordless
telephones or devices that use a wireless remote control, such as
televisions. If interference occurs, move the product away from the
device, plug the product or device into a different outlet or move the
lamp out of the line of sight of the remote control receiver.
• Unplug from electrical outlet for extended periods of non-use or
during lightning storms to ensure protection of the electronics.
• WARNING: Do NOT use lubricating agent in assembly; please see
troubleshooting section if you are having difficulty assembling your
lamp.
• WARNING: Do not use the lamp outside or in wet locations such as
bathrooms. It is intended for indoor, dry use only.
• WARNING: This product contains Mercury in the bulb. Dispose of
bulb per local regulations.

Important Safety Instructions

SAVE THESE INSTRUCTIONS

Warnings and Precautions

Energy Saving Natural
®
3

Advertisement

Table of Contents
loading

Table of Contents