Cleaning Instructions; Lubrication - Grindmaster 810 Operation And Instruction Manual

GRIND CAP (ASSEMBLED)
DWG NO.: 83457 REVISION: REL
Model 865/890
GRIND CAP (ASSEMBLED)
GRIND CAP (ASSEMBLED) GRIND CAP (ASSEMBLED)
SCREW, 5/16-18 X 1" LG
SCREW, 5/16-18 X 1"LG SCREW, 5/16-18 X 1"LG

Cleaning Instructions

The outside of machine can be cleaned with a damp cloth or common household polishing wax. See
Shear Disc Replacement section in this manual for instructions on assembling and disassembling the grinder
parts. All parts that are in contact with food must be washed with warm soapy water, rinsed, sanitized and
air-dried.
Note: The person cleaning the parts should do so with clean hands. Before reassembling, wipe the
motor shaft with 2 or 3 drops of common household cooking oil in the area of the feedworm engagement to
make the assembly easier.

Lubrication

All bearings have been oiled for life. No further oiling is necessary.
800 Series Coffee Grinders
SCREW, 5/16 X 1" LG
FEEDWORM & ROTARY BURR
FEEDWORM & ROTARY BURR FEEDWORM & ROTARY BURR
ROLL PIN REPLACEMENT
FEEDWORM & ROTARY BURR
SHEAR DRIVE
GRIND HEAD
GRIND HEAD GRIND HEAD
Figure B
FIGURE : B
GRIND HEAD
SHEAR DISC
SHEAR COVER
ROLL PIN ROLL PIN
ROLL PIN
SHEAR COVER
SHEAR COVER SHEAR COVER
Page 5