Table of Contents
Advertisement
Special Advanced Features
Programming Automated Activities
The URC-SR3 has six Macro buttons (POWER, ALL
OFF, A, B, C, D) that are designed to store up to
20 commands in each button. Pressing any one of
the Macro buttons, or Automated activity, will send
out the series of commands that are stored in that
particular button.
MacroPower™ Total ALL ON/OFF
MacroPower makes several devices work together
by pressing one button. Imagine the convenience
of turning on your TV, your DVD player and your
CBL/SAT receivers by pressing a single button on
your URC-SR3. What could normally take three
remotes and three button pushes, the URC-SR3 can
accomplish with the press of one button. We call
that MacroPower. Any of the Power or the All Off
buttons can be programmed for MacroPower
control. To set it up, follow these easy steps:
STEP 1: To program MacroPower commands for
the Power ON button, press the POWER button
and the SELECT[SEL] button at the same time for 2
seconds until one of the component button LED
lights turns on.
POWER
SELECT
BUTTON
IMPORTANT: You have 30 seconds to perform the
next step while you are in programming mode. If you
do not press a button within 30 seconds, the compo-
nent LED light will turn off. The remote will exit the pro-
gramming mode and you will have to start over.
Page 14
Hide quick links:
Advertisement
Table of Contents
