Double-Strike; Double-Strike And Standard Print - Epson LX-86TM User Manual

You should get the following printout when you run this program
and type "E" and "emphasized" in answer to the questions.
This sample
t o p r o d u c e e m p h a s i z e d
The code to turn off emphasized is ESCape "F".

Double-strike

The other bold mode on the LX-86 is double-strike. For this mode
the printer prints each line, then moves the paper up slightly and
prints the line again. Each dot is printed twice, with the second one
slightly below the first as you can see in Figure
S t a n d a r d P r i n t
Figure 6-2. Double-strike and standard print
Unlike emphasized, double-strike combines with any draft pitch
(but not with NLQ) because it does not overlap dots horizontally.
Since each line in this mode is printed twice, the speed of your
printing is slowed. The code for double-strike is ESCape "G". Try it
in the the master program if you wish. The
strike is ESCape "H".
ESCape E
ses
U
D o u b l e - s t r i k e
p r i n t i n g .
6-2.
code
to turn off double-
p r i n t
41