Table of Contents
Advertisement
Printer
"freezes"
mode.
Can't get a full page in width.
Problems with paper feeding or
irregular darkness of printing.
F-2
in graphics The printer expects a certain
affect your system if possible.
You can also POKE the problem
codes directly to the printer port.
Seven- bit computers cannot
use the eighth pin
have a seven-bit computer and
a n y o f y o u r g r a p h i c s d a t a
numbers are larger than 127,
change the design so that all
numbers are less than
Be sure that no other commands
or carriage returns come between
the graphics command and its
data. See Chapter 9.
number of pin patterns, deter-
mined by n
and n
l
patiently until the quota is full.
Note that 9-pin graphics mode
requires two bytes for each col-
umn of graphics.
Some systems require a WIDTH
statement. See your system docu-
mentation.
If a self-adhesive label comes off
of the backing, it may stick be-
hind the platen and cause prob-
lems with paper feeding and
printing. If this happens, take
your LX-86 to a qualified service
person; do not attempt to re-
move the label yourself.
(12 8).
If you
128.
. It will wait
2
Advertisement
Table of Contents
