Attaching The Rails - HP EVA P6000 Reference Manual

Attaching the rails

1. Position left and right rack rails at the desired 'U' position in the rack, and adjust the rails to
fit the rack as needed (1,
2. Secure rack rails to the front and back rack columns using screws. Make sure that the shoulders
of the screws fit inside the square or round holes of the rack (2,
NOTE:
mounting. If installing rails in a round hole rack, use smaller-sized shoulder screws and pins
for mounting.
Figure 4 Secure rack rails
8 Installing disk enclosures into the expansion rack
Figure 4 (page
If installing rails in a square hole rack, use larger-sized shoulder screws and pins for
8)).
Figure 4).