Automatic Network Setup
■
Use the Automatic
supports DHCP. To set up your TV's cable network connection automatically,
follow these steps:
How to set up automatically
1. Go to the
(MENUm
Settings
◀
2. Select Wired, press ENTERE, and then
press
ENTERE
3. The network connection screen appears
and verifies the network connection. When
the connection has been verified, the
"Internet connection successful." message appears.
Network Setting
Network Settings
→
→
Network
Network
→ ENTERE)
again.
when connecting your TV to a network that
screen.
Network Settings
● The displayed image may differ depending on the
English
Select a network connection type.
Wired
Wireless(General)
Connect to the network using
LAN cable. Please make
WPS(PBC)
sure that the LAN cable is
connected.
One Foot Connection
model.
2/6
▶
Previous
Next
Cancel