❑ Switching between Anynet+ Devices
1. Press the TOOLS button, select
ENTERE.
2. Select
Device
If you cannot find a device you want, select
N
3. Select a device, and then press the
selected device.
◀
The
Device List
N
On
in the
●
Switching to the selected device may take up to 2 minutes. You cannot
cancel the operation during the switching operation.
●
If you have selected an Anynet+ device by pressing the SOURCE button
and then selecting its input source, you cannot use the Anynet+ function.
Make sure to switch to an Anynet+ device by using the
List, and then press the
menu appears only when you set
System
menu.
Anynet+
(HDMI-CEC), and then press
ENTERE
Refresh
ENTERE
button. You can switch to the
English
button.
to refresh the list.
Anynet+ (HDMI-CEC)
Device
List.
to
▶