Uniden Bearcat UBC144XLT Operating Manual page 8

I~
5. Channel
Display
6. WXKey
0iX)
7. SQUELCH
Control
8. VOLUME
Control I
Power Switch
9. REVIEWKey
(
REVIEW)
10. MANUAL Key
0ANUAl)
11. SCAN Key
GSCAN)
12. LOCKOUT
LED
13. Weather LED
6
Press
0iX) to find the local weather channel.
Adjust
SQUELCHto set the scan threshold. When you are
monitoring a single channel in Manual mode, adjust
SQUELCHto eliminate the background "rushing" noise
heard in the absence of an incoming signal.
Turn VOLUME
clockwise to turn the scanner on to increase
the volume. Turn counterclockwise to decrease the volume
or turn the scanner off.
Press (
REVIEW)
to review the frequency of the current channel.
Press
~
to stop scanning. Press
~
againto step
to the next channel. Also, use for direct channel acc~ss b~
first entering the channel number and then pressing.
MANUAL
to go directly to that channel.
Press
GSCAN)
to start scanning.
Lights when the current channel
is locked out.
Lights when in Weather Search
(WX) mode. Flashes when
searching for the active weather
channel in your area.
UD«XJT
1
~
5
-iL!QJ
@
Display
Mode
Current channel.
Scan or Manual
Channel that was current before was Weather
pressed.
Each numeric entry, decimal (-), and CD if Programming
entry error.
When
(REVIEW)
is pressed, displays
Review
programmed frequency, digit-by-digit.
L
Memory Loss
P, when scanner stops on the PriorityChannel. Priority