Viewing Caller Lists; Programming Features; Creating Your Own Invited Caller List; Code 41 - Digitone Call Blocker Owner's Manual

Viewing Caller Lists

You can review what numbers are stored in each caller list by entering programming: press and hold the
Program Button for 3 seconds until you see "Program Mode", then "Pick Up Phone", when the prompt
for "Enter Code" displays enter code:

Code 41

to view Blocked Caller list – use arrow buttons to view up or down. To remove an entry
press and hold the Block Button for 3 seconds on the front panel. The number will then be removed
from that list and entered back into the Invited list if code 96 # * (Global Invited List) is active.
Code 51
to view Individually Invited Caller list – use arrow buttons to view up or down. To
remove an entry press and hold the Block Button for 3 seconds on the front panel. The number will
then be removed from that list.
Code 53
to view Invited Caller in a Blocked Area Code list – use arrow buttons to view up or
down. To remove an entry press and hold the Block Button for 3 seconds on the front panel. The
number will then be removed from that list.
Code 61
to view VIP Caller list – use arrow buttons to view up or down. To remove an entry press
and hold the Block Button for 3 seconds on the front panel. The number will then be removed from
that list and entered back into the Invited list if code 96 # * (Global Invited List) is active.
To enter a specific program setting, press and hold the Program Button for 3 seconds until you see
"Program Mode", then "Pick Up Phone". When you pick up the phone connected to the TEL phone port
on the back of the Call Blocker, the display will show "Enter Code". Enter any program code listed in the
manual by simply dialing that program code with the phone's key pad to set caller lists or features.
The Call Blocker from the factory Invites every caller except No Number calls and OPX type calls which
are automatically hung up on, so you just enter those callers you want to block using either the Block
button on the front panel as the calls come in or if you already know the caller's number, you can enter it
with programming.

Creating your own Invited Caller list

If you want to block all callers and invite only specific numbers, you will use Code 97 # * to disable the
default Global Invited List and create your own invited call list using Codes 50, 52 or 60.
Programming Numbers - Invited, VIP and Blocked.

Programming Features

4
See