Removing Paper From The Tractor; Switching Between Continuous Paper And Single Sheets - Epson LQ-2070 User Manual

Removing paper from the tractor

1. To remove continuous paper, press the Tear Off/Bin button to feed
the paper's perforation to the tear-off edge of the printer cover.
Note:
If the page perforation is not properly aligned with the tear-off edge,
you can adjust the tear-off position using Micro Adjust. See
Chapter 3.
2. Tear off the paper.
3. Press the Load/Eject button to feed the continuous paper
backward out of the printer and into the standby position.
Caution:
c
Make sure you tear off your printed document before pressing the
Load/Eject button. Reverse feeding several pages at a time may
cause a paper jam.
Switching Between Continuous Paper and Single
Sheets
When using the push tractor in the front or rear position, you can
easily switch between continuous and single-sheet printing
without removing the paper.
2-30
Paper Handling