Printer Functions - Epson LQ-2070 User Manual

Function
Auto tear off
Auto line feed
Auto CR **
AGM **
0 slash
Buzzer
Roll paper
* The font selected in the Default Setting mode corresponds to Other on the
control panel. The following fonts are not selectable in the Default Setting
mode: Draft, Roman, Sans Serif, Courier, Prestige, and Script.
** These settings are effective when IBM2391 plus emulation is selected.

Printer functions

This section describes each of the printer functions.
Character table
Your printer has 11 standard character tables as well as tables for
20 other countries. See the Appendix for character samples.
International character set for Italic table
You can change 8 characters in the Italic character table to suit
your printing needs. Since these characters are often used in other
languages, they are named after countries and are referred to as
international character sets. See the Appendix for character
samples.
Font
You can select 6 fonts in Default Setting mode. The following fonts
are indicated on the control panel and can't be selected by default
settings: Draft, Roman, Sans Serif, Courier, Prestige, and Script.
Settings
On, Off
On, Off
On, Off
On, Off
On, Off
On, Off
On, Off
Using the Printer
3-9