Memory Function - Turbo Air TMW-1100E Manual

MEMORY FUNCTION

This microwave oven has 20 programmable pads (1~20).
PROGRAM
NOTE 1: If you want cooking in two or three stage, repeat step 3~5 once or twice, and display will
show "STAGE-2" or "STAGE-3".
After touching START pad to save cooking time and power level in 3-stage, you can see
" - END - " on the display.
NOTE 2: In case of original set, number 1~10 is programmed but cooking data is changeable later.
And number 11~20 is not programmed, so you will save cooking data.
After programming is finished, just touch the NUMBER pad of the memory number you want to select.
Then the oven will automatically start heating according to the pre-programmed cooking time and power
level.
* Preprogrammed Cooking Times and Power Level
Pad
1
2
3
4
5
6
7
8
9
10
1. Touch PROGRAM pad.
2. Touch the number pads. ex)5
3. Touch POWER pad. (Select
desired power level.)
4. Touch the NUMBER pads for
cooking time.
5. Touch START pad to save
cooking time and power level.
6. Touch STOP/CLEAR pad.
Cooking Time
20 sec.
40 sec.
1 min.
1:30 min.
2 min.
3 min.
4 min.
6 min.
8 min.
10 min.
The display will show "PROGRAM".
The display will show "PROG-05".
The MICROWAVE and % indicators light.
The display will show what you touched.
The display will show "STAGE-2" and long
beep sounds.
When you touch STOP/CLEAR pad,
MEMORY function ends.
11
Power Level
100 %
100 %
100 %
100 %
100 %
100 %
100 %
100 %
100 %
100 %