Shooting, Playback And Erasing; White Balance; Aperture Value - Olympus TG-620 Instruction Manual

S._oting, Playback, and Erasing
Shooting with the optimum aperture 2 Hold the camera and compose the shot.
In this mode, automatic shooting settings are activated
while also allowing changes to a wide range of
other shooting menu functions, such as exposure
compensation, white balance, etc. as needed.
_ The default settings of the function are highlighted in
_ iiiiiiiiiiiiiii_
Press the ON/OFF button to turn on the camera.
P mode indicator
Horizontal grip
Number of storable still pictures (p 67)
Monitor (standby mode screen)
_r} If P mode is not displayed, press <_ to display the
function menu screen and then set the shooting
mode to P. "Using the Menu" (p. 8)
Current shooting mode display
Verticalgrip
_r} When holding the camera, take care not to cover the
flash and microphone with your fingers, etc.
3 Press the shutter button halfway down to
focus on the subject.
• When the camera focuses on the subject, the
exposure is locked (shutter speed and aperture
value are displayed), and the AF target mark
changes to green.
• The camera was unable to focus if the AF target
mark flashes red. Try focusing again.
EN