Resetting The Printer; Cleaning The Printer - Epson EPL-N4000 Reference Manual

Resetting the Printer

There are two ways to reset (return to a fixed set of conditions)
the printer.
Reset
Reset the settings for the emulation mode and interface you are
using now by holding down ALT and Reset until
on the display. You can reset the printer anytime a printout is not
being sent on the interface you are using.
Reset all
Reset the settings for all emulation modes and interfaces by
holding down ALT and Reset until
display. You can also reset all emulation modes and interfaces by
turning the printer off and back on.
Note:
Reset clears all print jobs received from all interfaces; be careful not to
disrupt someone else's print job.

Cleaning the Printer

The printer needs only minimal cleaning. If you notice a decline
in print quality, clean the inside of the printer as described in this
section.
You should also clean the paper feeder and the printer cover every
few months. These procedures are described later in this section.
Follow the steps below to clean the inside of the printer and the
paper feeder.
5-42
Troubleshooting and Maintenance
appears
appears on the