Table of Contents
Advertisement
Left Side
Refer to the diagram below to identify the components on this side of the
Disney Netpal.
1
1
LAN Port
The eight-pin RJ-45 LAN port (10/100M bit) supports a standard
Ethernet cable for connection to a local network. The built-in
connector allows convenient use without additional adapters.
2
USB Port (2.0/1.1)
3
Microphone Jack
The microphone jack is designed to connect the microphone
used for Skype, voice narrations, or simple audio recordings.
Headphone Output Jack
4
The 1/8" stereo headphone jack (3.5mm) connects the Disney
Netpal's audio out signal to amplified speakers or headphones.
Using this jack automatically disables the built-in speakers.
1-8
2
3
4
Chapter 1: Knowing the Parts
Advertisement
Table of Contents
