Powering On Your Eee Pc - Asus Eee PC 1002HA Linux User Manual

Powering on your Eee PC

4
1. Install the battery pack
1
2. Connect the AC power
adapter
•
•
Remember to fully charge the battery (8 hours or more) before
first use and whenever it is depleted to prolong battery life. The
battery reaches its maximum capacity after a few full charging
and discharging cycles.
Your Eee PC may come with either a two or three-prong plug
depending on territory. If a three-prong plug is provided, you
must use a grounded AC outlet or use a properly grounded
adapter to ensure safe operation of the Eee PC.
2-2
2
Only use battery packs and power adapters supplied with this
Eee PC or specifically approved by the manufacturer or retailer
for use with this model or else damage may occur to the Eee PC.
The output voltage of this adapter is +12Vdc, 3A.
Never attempt to remove the battery pack while the Eee PC is
turned ON, as this may result in the loss of working data.
1
2
Chapter 2: Getting Started