Brother Simplicity SB700T Operation Manual page 39

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
e Unfold the edge of fabric, and position the
fabric with the wrong side facing up.
a Wrong side of fabric
b Basting
c Edge of fabric
Attach blind hem foot "R".
f
g Select a stitch.
h Remove the flat bed attachment and make
free-arm sewing possible.
• For details on free-arm sewing, refer to
"Using a free-arm style" (page 33).
i Slide the part that you wish to sew onto the
arm, make sure that the fabric feeds correctly,
and then start sewing.
a Arm
1 1
2
1
1
< Seen from the side>
j Position the fabric with the edge of the folded
hem against the guide of the presser foot, and
then lower the presser foot lever.
3
a Wrong side of fabric
b Fold of hem
c Guide
Adjust the stitch width until the needle
k
slightly catches the fold of the hem.
a Needle drop point
When you change the needle drop point, raise
the needle, and then change the stitch width.
a Stitch width
R
R
1
a
3
37