Installing A Hard Disk Drive In The Internal Drive Bay - Epson EL 33 User Manual

Epson printer user's guide
Table of Contents

Advertisement

Installing a Hard Disk Drive in the Internal Drive Bay

Your computer may have a hard disk drive already installed
using the hard disk drive mounting bracket. If not, you can
install a l-inch (third-height), 3 ½-inch wide drive below the
mounting bracket or above it.
Here you will find steps for the following procedures:
(if necessary)
(for third-height drives)
Note
Be sure to check the jumper settings on the drive before you
install a hard disk drive. Also, you will need to know the
number of cylinders, heads, sectors, etc. to select the correct
drive type in the SETUP program. See the documentation
that came with your drive for this information.
Before you can install a hard disk drive, you need to remove
any option cards that may be blocking your access to the hard
disk drive area. Once you have installed the drive, replace any
option cards you removed. See Chapter 3 for instructions.
4-2
Installing and Removing Drives

Advertisement

Table of Contents
loading

This manual is also suitable for:

El 4sEl 4s/33

Table of Contents