Sony Handgcam CCD-FX425 Operation Manual page 41

To reattach the eyecup
1
Align the groove on the eyecup with the •
mark on the barrel
Mark Groove
2
Turn the eyecup in the reverse direction of
the arrow.
Take a good posture for shooting
For hand-held shots, it is importantto hold the
camcorder properly.
• Hold the camcorder firmly and secure it with the
grip belt so that you can easily manipulate the
camcorder with your thumb.
• Place your right elbow firmly against your side.
• Place your left hand under the camcorder to
support it When adjusting the focus manually,
make sure the camcorder does not move.
• Stand opposite to the subject and take a
comfortable stance.
• Place your eye firmly against the viewfinder
eyecup.
• You can easily determine the horizontal plane by
using the viewfinder frame as a reference.
Use a tripod
If you have a tripod for a still camera, you can also
use it with the camcorder. If a tripod is not available,
try placing the camcorder on a tabletop or any other
flat surface of suitable height
Caution
When attaching a tripod not manufactured by Sony, the
length of the camera mounting screw must be less than
6.5 mm Otherwise the screw may damage the inner part of
the camera.
Less than 6.5 mm
(7/=inches)
Additional Information
41