Sony WEGA KLV-S20G10 Operating Instructions Manual page 29

ConnecUng_e TV
KLV-S2OGIO
2
(
AUDIO-L (white)
AUDIO-R (red)
Audio cable
Rear of TV
DVD Player
COMPONENT VIDEO OUT
Component video cable
-- PR
Notes on Using This Connection
Watch the DVD player Press TVNIDEO repeatedly to select the DVD player input or Video 4. (For KLV-
S 15G 10 model, select Video 3.)
Set up the remote control to If you have a non-Sony DVD player, you must program the remote control. See
operate the DVD player "Programming the Remote Control" on page 34.
Activate the remote control to Press VGR/DVD (FUNCTION).
operate the DVD player
Control DVD functions with the See "Operating a DVD Player" on page 36.
relnote control
Label video inputs to easily See the instructions for setting up Label Video Irlputs on page 51.
identify eqnipment connected to
the TV
To connect a DVD player with S VIDEO and audio connectors
It" your DVD player does not have component video (YPBPR) jacks, or the
component video inputs are already connected to another device, use this
connection.
1 Use an S VIDEO cable to connect the DVD player's S VIDEO output
jack to the TV's S VIDEO input jack (VIDEO 1 IN).
2 Use an audio cable to connect the DVD player's AUDIO output jacks to
the TV's AUDIO input jacks (VIDEO 1 IN).
g"_:_ If your DVD player IS not equipped with S V!DEOI use a VIDEO
cable (yellow) instead of the S VIDEO cable.
_0
,<
29