Sony Handycam CCD-TR42 Operation Manual page 48

Using the Remote Commander
Make sure that the COMMANDER mode is set to t)N in the mellu ,_ystcm (p.25).
,i i u i
0 MENU -
OFF
t,
i _
EX_TE
IME.U},_
i I it ,
Remote Control Direction
Aim the RemoteCommander to the remote sensorwithin the rangeas shown below.
15_I#
" ",:" "_ : _.... ;"_
Notes on the Remote Commander
• Keep the remote sensor away from strong light sources such as direct sunlight or illumination.
Otherwise, the remote control may not be effective.
• Be sure that there is no obstacle between the remote sensor and the Remote Commander.
• This camcorder works at commander mode VTR 2. The commander modes (1, 2, and 3) are used to
distinguish this camcorder from other Sony VCRs to avoid remote control misoperation. If you use
another Sony VCR at commander mode VTR 2, we recommend you change the commander mode or
cover the remote sensor of the VCR with black paper.
49