Sony Handycam DCR-DVD608 Operating Manual page 86

Trs@_÷shsstisS/Ssstisssd}
Even if you press EASY, menu
settings do not switch to their
defaults automatically.
• Follo_ing menu settings remain as they
were set even during Easy Handycam
operation.
]FILE NO. ]
]VOLUME]
[TV TYPE]
[ _ DISPLAY]
[BEEP]
[SUB-T DATE]
[CLOCK SET]
]AREA SET]
[DST SET]/[SUMMERTIME]
]WIDE SELECT] *
[DEMO MODE]
IFLASH MODE] **
[ _ LANGUAGE SET]
• DCR-DVD IOg/DVD608
•*DCR-DVD3Og/DVD70g
Your camcorder vibrates.
• Vibration occurs (h.,pending on tile condition
of the disc. This is not a malfimction.
A vibration is felt in your hand or a
faint sound is heard during
operation.
• This is not a mallhnction.
A motor sound is heard in the
camcorder when the disc cover is
closed without a disc.
• Your camcordcr is trying to recognize the
disc. This is not a malfunction.
Your camcorder gets warm.
• This is because the po_ er has been turned on
R)ra long time. This is not a malfunction.
Turn off your camcorder and leave it for a
while ill a cool place.
The supplied Remote Commander
does not function (DCR-DVD308/
DVD708).
• Set IREMOTE CTRLI to ION] (p. 72).
• Insert a battery, into the battery holder with
the +1 polarities correctly matching the +_
marks (p. 114).
• Remove any obstructions between the
Remote Commander
and the
remote sensor.
• Point the remote sensor away from strong
light sources such as direct sunlight or
overhead lighting. Otherwise, the Remote
Commander may not fimction properly.
Another DVD device malfunctions
when you use the supplied Remote
Commander (DC R-DVD308/DVD708).
• Seh:ct a commander mode other than DVD 2
for your DVD device, or cover tile sensor of
your DVD device with black paper.
The power abruptly turns off.
• When ap?roximatcly 5 minutes have elapsed
while you do not operate your camcorder,
the camcorder is auton/atically turned off
(A.SHUT OFF). Change the setting of
[A.SHUT OFF] (p. 72), or turn on the power
again, or
use fl_eAC
Adaptor.
• Charge the battery pack (p. 22).
The CHG (charge) lamp does not
light while the battery pack is being
charged.
• Turn the POWER switch to OFF (CHG)
(p. 22).
• Attach tile battery pack to the camcorder
correctly (p. 22).
• Connect the power cord to the wall outlet
properly.
• The battery charge is completed (p. 22).
86