Character Quality; Character Table; Shape Of Zero - Epson DFX-5000+ User Manual

Note:
High-speed draft mode is available only for 10 cpi printing. Also,
underlining and double-width are the only print enhancements that
work in high-speed draft mode. If you use a feature such as emphasized
double-strike in high-speed draft mode, the printer temporarily
or
sloivs to normal draft speed until the feature is turned off. This allows
you to use any print enhancement with out canceling high-speed draft
mode.
Character qualify
When DIP switch l-3 is on, the printer prints in near letter
quality (NLQ) mode. When this DIP switch is off, it prints in
draft mode.
This
T h i s i s n o r m a l d r a f t p r i n t i n g .

Character table

When DIP switch l-l is off and DIP switches l-4 through 1-8
are set on and off in various combinations, you can select the
character tables available in the Epson ESC/P mode. When
DIP switch l-l is on and DIP switches l-6 or l-8 are on or off,
you can select character table settings in IBM emulation mode.
See Appendix B for complete character tables.

Shape of zero

When DIP switch 2-l is on, the printer prints slashed zeros (0).
When the DIP switch is off, the printer prints open zeros (0).
This feature is useful for clearly distinguishing between an
uppercase O and zero when printing documents such as
program lists.
is NLQ
p r i n t i n g .
Using the Printer
3-15