Sony XR-CA350X Operating Instructions Manual page 12

This unit can control external CD/MD units.
If you connect an optional CD unit with the
CD TEXT function, the CD TEXT information
will appear in the display when you play a CD
TEXT disc.
Playing a CD or MD
1
Press CS_..E_ repeatedly to select CD
or MD.
In case of tape playback, press --_ to eject the
tape.
2
Press _ until the desired unit
appears.
CD/MD playback starts.
When a CD/MD unit is connected, all the
tracks play from the beginning.
Tip
With the optional MG Memory Stick System-up
Player MGS-X1 connected to this unit, press
to select "MD, " then press _ to
select the unit number of the MD (MD1 or MD2,
etc.).
Changing the display item
Each time you press _ during CD, CD
TEXT, or MD playback, the item changes as
follows:
Elapsed playback time
Disc name*VArtist name .2 _ Track name .3
Clock
*_ If you have not labeled the disc or if there is no
disc name prerecorded on the MD, "NO NAME"
appears in the display.
,2 If you play a CD TEXT disc, the artist name
appears in the display after the disc name. (Only
for CD TEXT discs with the artist name.)
* * If the track name of a CD TEXT disc or MD is not
prerecorded, "NO NAME" appears in the
display.
Automatically scrolling a display
item -- Auto Scroll
If the disc name, artist name, or track name on
a CD TEXT di_ or MD exceeds 8 characters
and the Auto Scroll function is on, information
automatically scrolls across the display as
follows:
• The disc name appears when the disc has
changed (if the disc name is selected).
• The track name appears when the track has
changed (if the track name is selected).
If you press _) to change the display
item, the di_ or track name of the CD TEXT or
MD disc is scrolled automatically whether you
set the function ON or OFF.
During playback, press _ and @ to
select "A.SCRL-ON."
To cancel Auto Scroll, select "A.SCRL_OFF."
Note
For some discs with very many characters, the
following cases may happen:
-- Some of the characters are not displayed.
-- Auto Scroll does not work.
12