And Sound; (A/V Sync); Audio Cd - Sony DAV-FX500 Operating Instructions Manual

(A/V S YN C)
When the sound does not match the pictures on
the screen, you can adjust the delay between the
picture and sound.
1
Press Q DISPLAY when the system is
in stop mode.
The Control Menu at)i'_e:u's.
2 ,I,, :: :{{{ _'
Press I"1 to select [A/V SYNC],
then press @.
The options lot [A/V SYNC] appear.
O Press .1-1,1, to select the setting you
want and press @.
The delau]l setting is underlined.
• [OFF]: does not adjust.
• [ONI: adjusts Ihe diHerence between
picture and sound.
The selected setling lakes eflecl.
• Depending on Ihe input slream, Ihis funclion may nol
be effective.
• Depending on the sound field, Ihis l_mction may not
be effective.
Selecting a playback area on
a 2 channel + Multi-channel
Super Audio CD
Some Super Audit) CDs consist of a 2 channel
playback area and a multi-chamtel playback
area. You can select the playback area you want
to listen to.
1
Press U3 DISPLAY when the system is
in stop mode.
The Control Menu appears.
2
Press ,I-14,to select [MULTI/
2CH], then press @.
The options for [MULT1/2CH] appear.
3 Press ,I,/,I, to select the setting you
want and press @.
• [MULTI]: plays the multi-channel
playback area.
• [2CH]: plays the 2 chamlel playback area.
"MULTI" lights up in the front panel
display when playing the multi-channel
playback area.
• You cannot change the playback area during
playback.
Selecting a playback layer
when playing a hybrid Super
Audio CD
Some Super Audit) CDs consist of an HD layer
and a CD layer. You can select the playback
layer you want to listen to.
Press SA-CD/CD when the system is in
stop mode.
Each tinte _ou press the button, an HD layer or a
CD layer is alternately selected. When playing a
CD layer, "CD" lights up in the from panel
display.
48us