(Resume Play) - Sony DAV-FX500 Operating Instructions Manual

(Resume Play)
When _ou stop the disc. the system remembers
the point where you pressed • and "Resume"
appears in the front panel display. As long as
you do not remove the disc, Resume Play will
work even if the system enters standby mode by
pressing I/(L3.
1
While playing a disc, press • to stop
playback.
"Resume" appears in the front panel
display.
If "Resume" does not appear, Resume Play
is not available.
2 Press [_>-.
The s_stem starts pla2rback from the point
where you stopped the disc in Step 1.
• Depending on where you stop the disc, the system
may not resume playback from exactly the same
point.
• The point where you stopped playing may be cleared
when:
you eject the disc.
the system enters standby mode (DATA CD/
DATA DVD only).
you change or reset the settings on the Setup
Display.
you change the fimction by pressing FUNCTION
+_.
you disconnect the AC power cord (mains lead).
• For DVD-Rs/DVD-RWs in VR mode. VIDEO CDs,
CDs, Super Audio CDs, DATA CDs, and DATA
DVDs, the system remembers Ihe resume playback
point for the current disc.
• The resume point is cleared when:
you select another disc.
• Resume Play does not work during Program Play and
Shuffle Play.
• This fimction may not work properly with some
discs.
• To playfiom thebeginningofthe disc,press• twice,
then press [2:>.
To enjoy a disc that is played
before by resume playback
(Multi-disc Resume)
(DVD VIDEO, VIDEO CD only)
This system stores the point where you stopped
the disc lor up to 40 discs and resumes playback
the next time you insert the same disc. If you
store a resume playback point lk_r the 41st disc.
the resume playback point for the first disc is
deleted.
To activate this function, set [MULTI-DISC
RESUME] in [CUSTOM SETUP] to [ON]. For
details, see "[MULTI-DISC RESUME] (DVD
VIDEO/VIDEO CD only)" (page 77).
• To play from the beginning of the disc, press • twice,
then press [2:>.
RN]
• If [MULTI-DISC RESUME] in [CUSTOM SETUP]
is set to [OFF] (page 77), the resume point is cleared
when you change Ihe fimction by pressing
FUNCTION +_.
38us