Table of Contents
Advertisement
[OFF]: The system does not output
progressive signals. Select this setting
when:
– your TV does not accept progressive
signals, or,
– your TV is connected to jacks other than
the COMPONENT VIDEO OUT jacks.
[ON]: The system outputs progressive
signals. Select this setting when:
– your TV accepts progressive signals,
and,
– the TV is connected to the
COMPONENT VIDEO OUT jacks.
When you select [ON], the confirmation
display appears. Follow the Steps below.
8
Press C/c to select [START], then
press
.
The system outputs the progressive signal
for 5 seconds. Check that the screen is
displayed correctly.
9
Press C/c to select [YES], then press
.
The system outputs the progressive signal.
When you select [NO], the system does not
output the progressive signal.
Step 6: Enjoying Sound
from all the Speakers
You can enjoy DVD, TV, or VCR sound from
all the speakers in this system.
X/x/c,
1
Press FUNCTION +/– repeatedly until
the desired function appears in the
front panel display.
Each time you press FUNCTION +/–, the
function changes as follows.
"DVD" t "TUNER FM" t "TUNER
AM" t "USB" t "TV" t "SAT/
CABLE" t "DMPORT" t "AUDIO"
t ...
Function
Source
"DVD"
Disc that is played by the
system
"TUNER FM"/
FM/AM radio (page 65)
"TUNER AM"
"USB"
USB device (page 71)
"TV"
TV
"SAT/CABLE"
Component that is
connected to the SAT/
CABLE jacks on the rear
panel
"DMPORT"
DIGITAL MEDIA PORT
adapter (page 80)
FUNCTION
+/–
SYSTEM
MENU
33
GB
Advertisement
Table of Contents
