Screen - Sony Cyber-shot DSC-P92 Operating Instructions Manual

IglDisconnecting the USB
cable, removing the "Memory
Stick," or turning off the
camera during a USB
connection
ForWindows 2000, Me, or XP users
1 Double-chck _ on the task tray.
2 Chck _a* (Sony DSCk then chck [Stop[
3 Confirm the devine on the confirmanon
window, then click [OK].
4 Chck [OK]
Step 4 is unnecessary for Windows XP
users.
5 Disconnect the USB cable, remove the
'Memory Stick," or turn off the camera
For Windows 98 or 98SE users
Confirm that the access indicators (page "vS)
on the LCD screen are turned white and
carry- out only Step 5 above
Copying images using
"Image Transfer"
- Windows 98/98SE/2000/Me
Connect the camera and your
computer with the USB cable.
"Image Transfer" launches and the images
are automatically copied to the computer.
When copying is complete, "ImageMixer"
automatically launches and images appear.
• Normally "Image Transfer" and "Date" folders
are created inside the "My Docmnents" folder.
and all of the image files recorded wlvh the
calnela are copied into these folders.
• "_u can change the "Image T_ansfer" settings
(page 80)
- Windows XP
Connect the camera and your
computer with the USB cable.
"hnage Transfer" starts up automatically
and the images are automatically copied to
the computer.
Windows XP is set so that the OS AmoPlay
Wizard activates.
If you want to cancel the setting, follm_ the
procedure below.
[] Click [Start], then click [My
Computer].
[] Right-click [Sony
MemoryStick], then click
[Properties].
[] Cancel the setting.
@ ('lick [AutoPlay].
@ Set [(ontent type] to [Pictures].
@ Check [Select an action to per±\n]n]
trader [Actions], select [Take no
action], then click [Apply].
(_) get [(ontent B'pe] to [Video files]
and proceed step @. Set [Content
type] to [Mixed content] and
proceed step @.
(_) Click [OK].
The [Properties] screen closes.
The OS AmoPlay Wizard does not
start up automatically even if the
USB connection is made next time.
=m
ira
o
o
g
79