On The Index (N-Iple-Ilnage) Screen - Sony Cyber-shot DSC-P92 Operating Instructions Manual

[] Select [OK] with I_, then press
Q.
The o-n mark turns white and the
selected image is protected.
To cancel the protection
In Step I_ll, select [Cancel], or in Step [],
select [Exitl.
To release protection
In Step [] select an image for which you
want to release protection with A,Ti4i_
and wess O. The _ mark turns gray and
repeat this operation for all the images for
which you want to release protection. Then,
press MENU. select [OK], and press O.
To protect all the images in
folder
In Step I_11select [All In Folder], then press
O. Next, select [On], then press O.
To release protection of all the
images in the folder
In Step _], select [All In Folder] and press
O. Then select [Off], and press O.
On the Index (triple.image)
screen
[]
[]
[]
[]
Set the mode selector to [j_,
press the zoom W (index)
button twice to switch to the
Index (triple-image) screen.
Move the image you want to
protect to the center with _1/1_.
Press MENU.
The menu appears.
Select [Protect] with A/V, then
press 0.
The center image is protected and the
(Protect) mark is indicated on that
image.
[] To protect other images, move
the image you want to protect
to the center with _1/1_, and
repeat Step L_I.
To release protection
In Step [] select the image from which
you want to release protection, and press O.
To release protection from all of your
images, repeat this process i\)r each of them.
64