Connecting Alternative Power Sources; Using House Current - Sony Handycam CCD-FX310 Operation Manual

You can choose any ofthe following power sources foryour c amcorder: battery pack ( see
page 6),house c urrent, and 12/24 V car battery.
The appropriate power source foryou tochoose depends ontheplace w here y ou want to
use your c amcorder.
Place Power source Accessory to be used
Outdoors Battery pack Battery pack NP-55 (supplied), NP-77H/77HD,
NP-77, NP-66H or NP-55H
Indoors House current AC power adaptor AC-V35/V35A (supplied),
AC-V30 or AC-S10
In the car 12 V or 24 V car DC pack DCP-77
battery
Note on power sources
Disconnectmg the power source or removing the battery pack during recording or playback may
damage the inserted tape In this case, supply the power again _mmed_ately.
The supplied AC-V35,V35A AC power adaptor _s requrred.
1
3
1
Align the flat side of the connecting plate with the white line on the
camcorder, and push down and slide it in the direction of the arrow.
Connect the AC power adaptor to a wall outlet.
Set the CHARGE/VTR selector of the AC power adaptor to VTR.
See the instruction manual of the AC power adaptor for details.
To remove the connecting plate
Remove _tin the same way as you do with the battery pack. See page 7.
22
Advanced Camera Operation