Satellite Receiver - Sony FD Trinitron WEGA KV-34HS420 Operating Instructions Manual

Satellite Receiver
Using
S V!DEO jacks?
See page 15.
Toconnect a satellite receiver
1
Connect the satellite antenna cable to the satellite receiver's
satellite input jack.
2 Use an A/V cable to connect the satellite receiver's A/V output
jacks to the TV's A/V input jacks.
3 Connect a CATV cable from your cable or antenna to the satellite
receiver's VHF/UHF input jack.
4 Use a coaxial cable to connect the satellite receiver's VHF/UHF
output jack to the TV's VHF/UHF input jack.
5 Run the satellite receiver's setup program (see the satellite
receiver's manual for details).
ill
s VIDEOi_ _,_°°T v,,/_xJ I PY 17 illl
ii i
!
AtV cable
4
CAW cable
3
Cables are often
co!or-coded to connectors _
Connect red to red,
white to white; etc.
Satellite antenna
co ,o
Notes on Using This Connection
Watch the satellite receiver Press TV/VIDE0 repeatedly to select the satellite receiver input
(VIDE() 1 in the illustration).
Set up the TV remote control to operate the If you have a non-Sony satellite receiver, you must program
satellite receiver the remote control. See
"Programming
the Remote Control"
on pages 37-38.
Activate the TV remote control to operate Press SAT/CABLE FUNCTION.
the satellite receiver
Control satellite receiver functions with the See "Operating a Satellite Receiver" on page 43,
TV remote control
Label video inputs to easily identify See the instructions for setting up Video Labels on pages 58-
equipment connected to the TV 59.
21