Vcr And Cable Box - Sony FD Trinitron WEGA KV-34HS420 Operating Instructions Manual

VCR and Cable Box
Using
SVIDEO jacks?
Seepage 15,
Forbest
results, use
thisconnection if:
[] Your cable company scrambles some ch_lnels, such as premium
channels (which requires you to use a cable box), but does not
scramble all channels.
Withthis connectionyou can:
[] Use the TV remote control to change channels coming through
the cable box. (You must first program the remote control for
your specific cable box; see "Programming the Remote Control"
on page 37.)
[] Use the TV remote control to change channels coming directly
into the TV's VHF/UHF jack. (The TV's tuner provides a better
signal than the cable box.)
[] Record channels coming through the cable box and channels
coming directly into the TV.
To connect a VCR and cable box, you need:
[] A splitter, which is a small, inexpensive device that you can
purchase at your local electronics store.
_ DIGITAL CABLE BOX USERS: If you are connecting a digital cable
box, you will need a special bi-directional splitter that is designed
to work with your digital cable box. Contact your cable provider for
details.
[] Three coaxial cables.
[] Two A/V or S VIDEO cables with audio cables.
To connect the VCRand cable box
1
Connect the CATV cable to the single (input) jack of the splitter.
2 Use a coaxial cable to connect one of the splitter's two output
jacks to the TV's VHF/UHF jack.
3 Use a coaxial cable to connect the splitter's other output jack to
the cable box's input jack.
4 Use a coaxial cable to connect the cable box's output jack to the
VCR's RF input jack.
5 Use an A/V cable to connect the cable box's A/V output jacks to
the TV's A/V input jacks.
6 Use an A/V cable to connect the VCR's A/V output jacks to the
TV's A/V input jacks.
7 Run the Auto Setup program, as described in "Setting Up the
Channel List" on page 32.