Service Note; Ejected (Forced Ejection); Attention At Installation Of Harness (Dm-146) - Sony BDP-BX1 Service Manual

1-1.
1.
2.
DISC REMOVAL PROCEDURE
SECTION 1
SERVICE NOTE
BDP-BX1/S350
IF THE TRAY CANNOT BE EJECTED (FORCED EJECTION)
Remove the upper case. (Refer to page 2-1)
Insert a clip in the hole of a drive and open a tray.
Note: Use a clip of about 1.2 mm in the diameter
clip
(Use that of about 1.2 mm in the diameter'
\
hole
tray
1-2. Attention at installation of harness (DM-146)
1!'
t
Lead pin dressing method change.
From top side.
Uppercase
Need distance: Over 5 mm. ben. Actual: Around 12 mm after
Harness (DM-146) bending height.
Less than Heat-sink height.
|
1-1