Tuning - Sony STR-V555ES Operating Instructions Manual
Fm stereo fm-am receiver
Hide thumbs
Also See for STR-V555ES:
- Operating instructions manual (68 pages) ,
- Dimensional drawing (1 page) ,
- Service manual (104 pages)
Table of Contents
Advertisement
Direct Tuning
Automatic
Tuning
Use the supplied
remote
to perform
the following
operations.
For details
on tile buttons
used
in this section,
see the operating
instructions
for the supplied
remote.
1
Rotate
FUNCTION
to select
the tuner.
The last received
station
is tuned
in.
2
Press FM/AM
to select the FM or AM band.
3
Press D. TUNING.
4
Press the numeric
buttons
to enter
the frequency.
Example 1: FM 102.50 MHz
(9 -®-®-®-®
Example 2: AM 1350 kHz
(You don't have to enter the last "0" when the tuning
scale is
set to 10 kHz.)
Q-®-®-®
If you cannot
tune in a station
and the
entered
numbers
flash
Make sure you've
entered
tire right frequency.
If'not,
repeat Steps 3 and 4.
If tire entered
nuinl_ers still flash, tire fl'equency
is not
used in your area.
5
If you've
tuned
in an AM station,
adjust
the
direction
of the AM loop antenna
for optimum
reception.
6
Repeat
Steps
2 to 5 to receive
another
station.
"_" If you try to enter a frequency that is too precise for the
tuning scale
The entered
value is atltomatically
rotmded
tip or down.
The
tuning
scale
for direct
tuning
differs
depending
on the area
code
as shown
in the following
table.
For details
on area codes,
see page
3.
Area code
FM tuning scale
AM tuning scale
UC
50 kHz
10 kHz
(can be changed
to 9 kHz)*
CN, CED
50 kHz
9 kHz
E
50 kHz
9 kHz
(can be changed
to 10 kHz)
* To change the AM tuning
scale, see page 62.
For details on the buttons
used in this section, see "Brief
descriptions
of buttons
used to receive broadcasts"
on
page 46.
1
Rotate FUNCTION to select the tuner.
Tire last received station
is ttmed in.
Press FM/AM to select the FM or AM band.
Press TUNING (PTY SELECT) + or TUNING (PTY
SELECT) -.
Press the + button to scan fi'oi-n low to high; press tire
button
to scan fi'om high to low.
Tire receiver stops scanning
whenever
a station is
received.
When the receiver
reaches either end of the
band
Scarming is repeated
in the same direction.
To continue scanning,
press TUNING (PTY SELECT) +
or TUNING (PTY SELECT) - again.
_<,
_0
47
Hide quick links:
Advertisement
Table of Contents
