General - Sony WEGA KDE-37XS955 Operating Instructions Manual

General
How to reset TV to factory Turn on the TV. While holding down the button on the remote control,
settings press the button on the right side of the TV. (The TV will turn itself off,
then back on again.) Release the button.
How to restore Video settings to Press the button on the remote control while in the Video Menu (see page
factolT settings 92).
How to restore Audio Setiings io Press the button on the remote control while in the Audio Menu (see page
factol T settings 95).
_annotcy_i_ihro_ghthe o_her g_ _re _he _no_ set p_g_i65i
video equipment connected to
the TV
Cann0{
operaie Menu ..... If a Menu option appears in gray, this indicates that the TV is in a state in which
the Menu option is not available.
Lost password In the pass; ord screen isee page
i6ii; enierihefoiiowin} m;;ter p;_,:ordi
The master password clears your previous password; it cannot be used to
temporarily unblock channels.
TIMER LED on front panel is lit The LED (see page 16) blinks when the TV is mined on, then shuts off when the
picture is displayed. If the LED blinks continuously, this may indicate the TV
needs service. When lit, indicates that the timer is set (page 107). When the timer
is set, this LED will remain lit even when the TV is turned o112
Digital cable box does not work If you are connecting a VCR and digital cable box using a splitter, as described on
page 32, you must use a special bi-directional splitter that is designed to work with
your digital cable box. Contact your cable TV company for details.
Cannot record digital channels Only analog channels can be recorded to your VCR.
to VCR