Sony WEGA KDE-37XS955 Operating Instructions Manual page 34

75-ohm coaxial cable
I Coaxia
cable
Coaxial
cable
A/V cable
CATV cable ......I_
Watch cable (unscrambled) Press repeatedly to select the cable input (CABLE in the illustration).
channels
Watch cable box (scrambled) Turn on the VCR and tune it to the channel the cable box is set to (usually channel 3
channels or 4). Press repeatedly to select the VCR input (VIDEO 1 in the
illustration). Use the cable box to change channels.
Watch the VCR Press : repeatedly to select the VCR input (VIDE() 1 in the illustration).
Set up the remote control to If you have a non-Sony VCR, you must program the remote control. See
operate the cable box or VCR "Programming the Remote Control" on page 58.
Activate the remote control to For the cable box, press . For the VCR, press
operate the cable box or VCR .
Control specific cable box and See "Operating a Cable Box" on page 60 and "Operating a VCR" on page 61.
VCR functions with the remote
control
Label video inputs to easily See the instructions for setting up Video Labels on page 105.
identify equipment connected to
the TV
_3 Do not leave the display indication of the cable box and VCR
turned on.