Safety - Genie Superlift Advantage Operator's Manual

Third Edition • Third Printing
Do not place ladders or scaffolding against any part
of the machine.
Do not use the machine on a moving or mobile
surface or vehicle.
Do not exceed the rated load capacity. See Load
Capacity Charts section.
Avoid debris and uneven surfaces while rolling a
Genie Superlift with the legs folded up.
Do not replace machine parts critical to stability or
structure with items of different weight or
specification.
Do not use a straddle base or the flat forks on an
SLA-20 or an SLA-25.
Lifting Hazards
Use proper lifting techniques to load or tip the
machine.
Use proper lifting techniques when installing or
removing the load handling attachments.
Part No. 97550
Electrocution Hazards
This machine is not
electrically insulated and
will not provide
protection from contact
with or proximity to
electrical current.
Keep away from the
machine if it contacts
energized power lines. Personnel must not touch or
operate the machine until power lines are shut off.
Maintain safe distances away from electrical power
lines and apparatus in accordance with applicable
governmental regulations and the following chart.
Voltage
Phase to Phase
0 to 300V
300V to 50KV
50KV to 200KV
200KV to 350KV
350KV to 500KV
500KV to 750KV
750KV to 1000KV
Allow for mast movement and electrical line sway
or sag, and be aware of strong or gusty winds.
Do not use the machine as a ground for welding.
Bodily Injury Hazard
Do not grasp the cable.
Genie Superlift Advantage
Operator's Manual
SAFETY RULES
Minimum Safe
Approach Distance
Feet Meters
Avoid Contact
10 3.1
15 4.6
20 6.1
25 7.6
35 10.7
45 13.7
3