Sylvania LC420SS8 Owner's Manual page 14

[] Main Menu
Thissection describes t heoverviewofthe mainmenudisplayed whenyou
press[SETUP]. F ormoredetails, see thereference pageforeach item.
The mainmenuconsists o f the functionsetting itemsbelow.
Press [SETUP].
• EXIT
To exit settings.
• PICTURE
You can adjust the picture quality.
(Refer to "Picture Adjustment" on page 22.)
• SOUND
You can adjust the sound quality.
(Refer to "Sound Adjustment" on page 23.)
• CHANNEL
You can automatically scan the viewable channels
and remove those that are undesired.
(Refer to "Auto Channel Scan" on page 14.)
• DETAIL
You can change the display format for closed
caption, which displays the dialogue ofa TV program
or other information across the TV screen.
(Refer to "Closed Caption" on page 24.)
Set the viewing limitations.
(Refer to "V-chip" on page 28.)
Adjust the position, stability and clarity of the PC
screen.
(Refer to "PC Settings" on page 31 .)
And select the sound input for the HDMI1 input jack
if your unit is connected to an HDMI device.
(Refer to "HDMI Audio" on page 32.)
• LANGUAGE
You can change the language (English, Spanish,
French) displayed on the main menu.
(Refer to "Language Selection" on page 15.)
[]Auto Channel Scan
If you switchwires(e.g.,betweenantenna and CATV) o r if you movethe
unit to a different areaafter the initial setting, or if you restorethe DTV
channelyou deleted, you will needto perform auto channelscan.
Before you begin:
Makesureif the unitisconnected to antennaorcable.
Press [SETUP] to display the main menu.
iJ
2 Use [Cursor AIr] to select "CHANNEL", then press
[ENTER].
or
3
Use [Cursor A/r] to select "Autoscan", then press
[ENTER].
or
Use [Cursor A/r] to select an appropriate option, then
press [ENTER].
or
• When aerial antenna is connected, select "Air".
• When connected to CATV, select "Cable".
• Scanning and memorizing of channels start
automatically.
• When the scanning and memorizing are completed,
the lowest memorized channel will be displayed.
EN