Sylvania LC195SL9C Owner's Manual page 20

[] Manual Register
Themanualregister function letsyouaddthechannels t hat werenot
scanned bytheautochannel s can duetothe reception condition at the
initial setup.
Press [SETUP] to display the main menu.
SETUP
[]Antenna Confirmation
Thisfunctionletsyoucheck the digitalsignalstrengthofeachchannel.
Press [SETUP] to display the main menu.
SETUP
2 Use [Cursor A/V] to select "CHANNEL", then press
[ENTER].
Use [Cursor A/V] to select "CHANNEL", then press
[ENTER].
or
OF
3 Use [Cursor A/V] to select "Manual Register", then
press [ENTER[.
or
Use [Cursor A/V] to select "Antenna", then press
[ENTER].
OF
Use [the Number buttons] to enter the number of the
channel you want to add, then press [ENTER].
®®@
®®®
®®®
®®
Use [the Number buttons] or [CH &IV] to select the
channel for which you want to check the digital signal
strength.
®@@
®®®
@®®
®®
or
5 Press [SETUP] to exit.
SETUP
• If the channel is set to analog channel or external
input, you cannot confirm the antenna condition.
Note:
• If set up completes successfully,
"Registered to the channel list" is displayed.
• If external input is used, it is not possible to register the
channel and "Unavailable" will be displayed on the TV
screen,
• By using [CH •/V], you can select the memorized
channels only.
Press [SETUP] to exit.
SETUP
EN