Before You Start; Troubleshooting - TomTom ECLIPSE Manual

Hide thumbs Also See for ECLIPSE:

Table of Contents

Before you start

Switching on

Follow the instructions at the start of this manual to dock your TomTom in

your car stereo. Your TomTom can also be used without docking it in your car

stereo. A mount is available as an accessory so that you can use your

TomTom in other cars.

The first time you switch on your TomTom, it may take up to 20 seconds to

start. To switch off your TomTom, press and hold the On/Off button for 2

seconds.

Setting up

To set up your navigation device, you need to answer a few questions by

tapping the screen.

Important: Take care to select the correct language, since the language you

choose will be used for all menus and written instructions.

Always make sure that you are using the latest version of the TomTom

application on your TomTom. You can update the application using TomTom

HOME.

If you have problems turning on your TomTom, try resetting your TomTom.

To reset your TomTom, use a straightened paper clip, or something similar, to

push the reset button. The reset button is next to the memory card slot, on the

bottom of your TomTom. Then turn on your TomTom.

Improving reception

If your TomTom takes longer than 5 minutes to find your current position,

make sure that the device is in an open space away from tall objects such as

buildings or trees.

Table of Contents